Water answers · Leak detection

What is a commercial leak detection system?

Short answer. A commercial leak detection system is a set of leak sensors at a building's risk points and a flow monitor on the incoming water service, connected so that a wet floor or unusual flow sends an automated alert. The systems that prevent damage add two things: a valve that can close remotely or automatically where one is installed, and people and a contact chain that act on the alert.

At a glance

Leak sensorsAt the risk points
Flow monitoringOn the incoming service
Automated alerts24/7
ShutoffWhere installed
SWS water teamMon–Fri · 7am–11pm ET
750+ commercial properties·200M+ litres saved annually·Serving property managers since 2007
Four parts

The four parts of a commercial leak detection system

  • Leak sensors. Small sensors placed where water does damage: mechanical rooms, hot-water tanks, risers and valve stations, washroom stacks, vacant suites, kitchen and laundry connections. A sensor reports the moment it is wet.
  • Flow monitoring. A flow monitor on the incoming service records the building's water use minute by minute and learns its normal pattern, so use that does not fit the pattern stands out.
  • Automated alerts. When a sensor trips or flow leaves its normal range, an alert goes out automatically, at any hour, to the contact chain the building sets.
  • Shutoff, where installed. A controllable valve on the service or a branch line lets authorized users close it remotely, or closes on its own when a defined threshold is reached.
Sensors and flow

Sensors catch water. Flow monitoring catches what sensors cannot see.

A leak sensor only knows about water that reaches it. That makes sensors the right tool where a leak is likely and expensive: a tank in a locked mechanical room, a riser, a vacant suite.

Flow monitoring works the other way round. It does not know where the water is going, but it knows when the building is using water it should not be. A toilet running in an empty suite at 3 a.m. shows up as an anomaly even when no sensor is standing in the water. A building with both sees the leak that reaches a sensor and the leak that never does.

Some buildings add water submetering on top, so a rise in flow can be narrowed to one tower, floor or system rather than the whole building.

Beyond hardware

Why the hardware is only half the system

Sensors and meters are widely available. What decides whether a leak becomes a claim is what happens after the alert. How long a leak runs matters more than how big it is. In SMART's 2025 monitoring records, 66% of confirmed leaks were still running at 2 a.m., including most of the ones that started during the working day. 90% of the leak water we metered came from leaks that ran for a day or longer, and under 3% came from leaks that were stopped within 12 hours.

Source: SWS indoor leak monitoring records, January to December 2025. 66%: 174 of 262 confirmed leaks with a logged start time and duration. 90% and under 3%: share of metered volume across 216 confirmed leaks with a metered volume and logged duration.

So the questions to ask about any system are practical ones. Who receives the alert at night and on weekends? What closes the water if nobody answers? Who reviews the alert, works with site staff and writes up what happened? A system without those answers is a set of alarms.

The limits

What a leak detection system does not do

A leak detection system watches for new leaks. It does not find a leak you already suspect inside a slab or behind a wall; that is leak locating, a plumbing service that uses acoustic or thermal equipment. It does not repair pipes either. And it should never put fire protection systems on automatic shutoff, which is why SMART excludes them. Our answer on leak detection versus leak locating explains when to call a plumber instead.

Our approach

How SWS handles it

SMART's Indoor Water Management division runs commercial leak detection as a managed service rather than selling devices. We walk the building in a free water assessment (a site visit plus written findings), rank the risk points, then install and configure leak sensors, flow monitoring and, where it makes sense, a controllable valve. Alerts go out 24/7 to the contact chain you approve, and our water team, staffed Monday to Friday, 7 a.m. to 11 p.m. ET, reviews alerts and works with your contacts to stop the water. Every event closes with a written record, and every building gets a client dashboard and an annual Water Intelligence Report.

The full service is on our commercial leak detection page and, with irrigation and submetering, on indoor water management.

Keep reading

More water answers

See all commercial water management answers.

Common questions

What is a commercial leak detection system: common questions

What is the difference between a leak sensor and a leak detection system?

A leak sensor is one device that reports when it gets wet. A leak detection system connects sensors at several risk points with flow monitoring on the incoming service, automated alerts to a contact chain and, where installed, a valve that can shut the water off.

Can a leak detection system shut off the water automatically?

Yes, where a controllable valve is installed and configured. The valve closes on its own when a defined threshold is reached, and authorized users can also close it remotely. Fire protection systems are excluded from automatic shutoff.

Does a commercial leak detection system find leaks inside walls?

No. It flags new leaks as they start. Finding a leak you already suspect inside a slab or wall is leak locating, which a plumber or leak-locating specialist does with acoustic or thermal equipment.

Where should leak sensors go in a commercial building?

At the points where a leak is likely and costly: mechanical rooms, hot-water tanks, risers and valve stations, washroom stacks, vacant suites, and kitchen and laundry connections. A site walk-through decides the exact placement.

Who installs and monitors a commercial leak detection system?

SMART installs, configures and monitors the system as a managed service in Ontario, British Columbia and Quebec, with 24/7 automated alerts and a water team staffed Monday to Friday, 7 a.m. to 11 p.m. ET.

Free water assessment

Find out what your building needs

Book a free water assessment: a site visit plus written findings that show where sensors, flow monitoring and shutoff would matter in your building. Call 888.444.1530 or contact us.

Book a water assessment→

Connect with us

Want to talk through monitoring for one building or a whole portfolio? Call or email our indoor water team.

Direct line888.444.1530
Office hoursMon–Fri · 9am–5pm ET
Water teamMon–Fri · 7am–11pm ET
Automated alerts24/7