Water answers · Detection or locating

Leak detection vs leak locating: which one does your building need?

Short answer. Leak detection is continuous monitoring that alerts you when a new leak starts; leak locating is a one-time investigation that pinpoints a hidden leak you already know or suspect is there. If water is coming through a ceiling today, call a licensed plumber or leak-locating specialist; if you want the next leak caught while it is small, you need monitoring.

At a glance

Leak detectionOngoing monitoring
Leak locatingOne-time investigation
Water todayCall a plumber
The next leakMonitoring
SMART doesMonitoring only
750+ commercial properties·200M+ litres saved annually·Serving property managers since 2007
Two services

Two services that share a name

Search for "leak detection" and the results mix two different trades. One is monitoring: sensors and flow data that watch a building all the time and raise an alert when something changes. The other is leak locating: a technician arrives with acoustic listening equipment, thermal cameras or tracer gas to find a leak that is already running somewhere out of sight. Both are useful. They answer different questions, at different moments, and they are usually done by different companies.

Leak locating

What leak locating is, and when to call a plumber

Leak locating answers "where is the water coming from?" It is the right call when:

  • water is coming through a ceiling, a wall or a floor and the source is not obvious;
  • a slab, a buried service line or a pipe inside a wall is suspected;
  • a water bill or a meter reading shows use that nobody can explain, and the building has no monitoring to narrow it down.

A licensed plumber or a leak-locating specialist finds the leak and, in the plumber's case, repairs it. If there is active water damage, shut the nearest valve or the main if it is safe to do so, and call them first. Monitoring is not a substitute for that visit.

Leak detection

What leak detection is, and what it changes

Leak detection answers "will we know the next time?" Leak sensors sit at the risk points, a flow monitor watches the incoming service, and 24/7 automated alerts go to the building's contact chain the moment a sensor gets wet or flow leaves its normal range. Where a controllable valve is installed, the water can be shut off remotely or automatically.

The value is time. In SMART's 2025 monitoring records, 66% of confirmed leaks were still running at 2 a.m., and 90% of the leak water we metered came from leaks that ran for a day or longer. Under 3% came from leaks that were stopped within 12 hours.

Source: SWS indoor leak monitoring records, January to December 2025. 66%: 174 of 262 confirmed leaks with a logged start time and duration. 90% and under 3%: share of metered volume across 216 confirmed leaks with a metered volume and logged duration.

A leak caught early is still a repair. But it is a short visit to a known spot, not an investigation behind finished walls.

Working together

How the two work together

The services meet at the repair. Monitoring raises the alert and, where installed, closes the valve. Flow data and water submetering can narrow the problem to one part of the building. The plumber then has a shorter search and a smaller repair. After the repair, the event closes with a written record of when it started, when it was detected, how much water was involved and how it was resolved.

For buildings that have had a leak, the order is usually: locate and repair the current leak with a plumber, then put monitoring in place so the next one is caught early.

Our approach

How SWS handles it

SMART does monitoring, not leak locating or plumbing repair. Our Indoor Water Management division assesses the building, installs and configures leak sensors, flow monitoring and shutoff where installed, sends 24/7 automated alerts to your contact chain, and backs them with a water team staffed Monday to Friday, 7 a.m. to 11 p.m. ET. When an alert points to a repair, your plumber does the work; we keep the record. See commercial leak detection and indoor water management.

Keep reading

More water answers

See all commercial water management answers.

Common questions

Leak detection vs leak locating: common questions

Do you find leaks in slabs or behind walls?

No. Finding a leak you already suspect in a slab, behind a wall or underground is leak locating, which a licensed plumber or leak-locating specialist does. SMART provides continuous monitoring so the next leak is flagged while it is small.

Should I call a plumber or a leak detection company?

If there is water damage now, call a plumber or leak-locating specialist. If you want future leaks caught early, with alerts and shutoff where installed, talk to a leak detection monitoring company. Many buildings need the plumber first and monitoring after.

Does SMART do plumbing repairs?

No. SMART does not carry out plumbing repairs. When an alert points to a repair, your plumber does the work, and the event is recorded in your dashboard and annual Water Intelligence Report.

Can monitoring help a plumber find a leak faster?

Often. Flow data shows when unusual use started, and submetering can narrow it to one tower, floor or system, which shortens the search. It does not replace the plumber's locating equipment.

What is commercial leak detection?

Commercial leak detection is continuous monitoring of a commercial building with leak sensors and flow monitoring, automated alerts to a contact chain, and remote or automatic shutoff where a valve is installed.

Free water assessment

Already fixed the last leak? Catch the next one early.

Book a free water assessment: a site visit plus written findings that rank the risk points in your building. Call 888.444.1530 or contact us.

Book a water assessment→

Connect with us

Want to talk through monitoring for one building or a whole portfolio? Call or email our indoor water team.

Direct line888.444.1530
Office hoursMon–Fri · 9am–5pm ET
Water teamMon–Fri · 7am–11pm ET
Automated alerts24/7