Water management for industrial properties, where nobody is watching the water.
Industrial sites are large, lightly staffed and often leased to tenants who look after their own space. A leak in a vacant unit or a broken irrigation mainline at the back of the lot can run for weeks. SMART measures the water, sets alarms on it and services the systems, so the owner hears about a problem from us and not from the bill.
Where industrial sites lose water.
On a site with no building staff, water loss is found by whoever opens the next bill.
Vacant and lightly used units
A unit between tenants, or one staffed a few days a week, has nobody to notice a failed fitting or a running fixture. The water keeps flowing until someone unlocks the door.
Long mainlines and big sites
Irrigation on an industrial site means long runs of pipe, several points of connection and zones far from any entrance. A mainline break under turf can go unseen for a long time.
Trailers, ploughs and construction
Heads and valve boxes along truck courts, curbs and boulevards are broken by trailers, snowploughs and site work. Each one runs at full flow every cycle until it is found.
Who pays for the water
Where water is recovered from tenants, one shared meter turns the allocation into an estimate. Waste on the common systems ends up in a conversation with the tenants.
What SMART does for an industrial property.
The free assessment shows which of these the site needs. Many clients start with one and add the rest.
- Flow monitoring and leak detection. Flow monitoring on the incoming service and leak sensors at the risk points, with 24/7 automated alerts to your contact chain and shutoff where a valve is installed. See commercial leak detection.
- Water submetering. Clamp-on ultrasonic sensors, or sensors on most existing meters, so use can be seen by unit, building or system. SMART supplies the data and the reports; we do not bill tenants. See water submetering.
- Irrigation management. Weather-based control and flow monitoring on the landscape, so watering follows the weather and a broken line shows up as data. Flow alarms on monitored sites are responded to within 48 hours, weekends included. See irrigation management.
- Irrigation maintenance. Spring start-up, inspections, repairs and winterization by our own Certified Irrigation Technicians, with a written record after every visit. See commercial irrigation.
- Retrofit and installation. Older systems can be rebuilt zone by zone, including drip conversions that take water off the pavement. Our Certified Irrigation Designer plans the work and our crews install it. See retrofit and installation.
Everything reports into one client dashboard and one annual Water Intelligence Report, so the property has a single record of its water, indoors and out. See indoor water management and commercial irrigation.
Built for industrial portfolios.
Managed without a site office
Monitored sites report their own flow data. We watch for the anomaly and send a crew when the data shows a problem, so nobody has to drive the property to find it.
One program across many sites
SMART has 750+ commercial properties under management. The same service, the same dashboard and the same report apply to every site you add.
Approval before repairs
When an inspection or an alarm finds a repair, it is priced and approved within the limit you set before the work goes ahead. Nothing is done on the property that was not agreed.
A record for every site
A written record follows every irrigation visit, and the annual Water Intelligence Report sets out what each site used, what happened and what changed.
Questions we are asked.
We have no staff on site. How would we know about a leak?
Automated alerts go to the contacts you choose, 24 hours a day, and water can be shut off where a controllable valve is installed and set up for it. SMART's Water Management team is staffed Monday to Friday, 7am to 11pm ET, and follows up on every event.
Can you submeter individual units?
Yes. We install clamp-on ultrasonic sensors where there is no meter and fit sensors to most existing meters, so use can be seen by unit, building or system. SMART supplies the data and reports and does not bill tenants.
How quickly do you respond to an irrigation flow alarm?
Flow alarms on monitored irrigation sites are responded to within 48 hours, weekends included.
Where does SMART work?
Irrigation and indoor water management are available across Ontario, serviced from our head office in Milton. Indoor water management is also available in British Columbia and Quebec.
What does the free assessment involve?
A site visit and written findings. We walk the property, look at the water systems indoors and outdoors, review the water bills or meter data you can share, and send you what we found and what we would do about it.
Find out where your site is losing water.
Tell us about the property. We will visit, look at the water systems indoors and outdoors, and send written findings.
Book a free assessment→Connect with us
Want to talk through one property or a portfolio? Call or email the team that looks after it.